
Fast, thorough soot cleanup that protects your home and your health
Soot Removal in PACIFIC PALISADES, California
Soot Removal in PACIFIC PALISADES, California starts with a same-day inspection and a clear plan. Whether a kitchen grease fire left a film on your cabinets or smoke pushed soot into every closet in your Marquez Knolls home, we remove the residue, neutralize the odor, and get your house back to livable. We handle soot cleanup in PACIFIC PALISADES for homeowners, renters, and property managers, and we work directly with your insurance carrier.
What's included
What Our Soot Removal Service Includes
Every soot cleanup in PACIFIC PALISADES starts with a written scope. Here is what is covered in a standard job. If your situation needs more, we tell you upfront before any work begins.
Full Inspection and Testing
We use a thermal imaging camera and moisture meter to map soot travel and check for hidden water from firefighting. We test residue type on a small patch so we know which chemistry to use. This inspection is included in every estimate.
Containment and Air Scrubbing
Negative air machines and plastic containment keep soot from spreading to clean rooms. HEPA air scrubbers run throughout the job to pull fine particles out of the air. This is included on every job, not an add-on.
Surface Cleaning and Sealing
Walls, ceilings, framing, and hard surfaces get HEPA-vacuumed, sponged, and treated with a pH-matched degreaser. Porous framing gets sealed with encapsulant so any residual soot is locked in place. We clean top-down so residue does not fall on already-clean surfaces.
Odor Neutralization
We run hydroxyl generators or thermal fogging to break down odor molecules at the source. This is not masking. The equipment runs overnight and we check the result the next morning. Most jobs need 12 to 24 hours of treatment.
Debris Removal and Hauling
Contaminated insulation, damaged drywall, and charred material get bagged and hauled the same day. We do not leave debris in your driveway or on the curb. Disposal fees are included in the scope.
Final Walkthrough and Documentation
You walk the job with us room by room. We provide photo documentation and a cleanup report you can hand to your insurance adjuster. If anything is not right, we fix it before we leave.
Service overview
What Soot Removal in PACIFIC PALISADES, California Involves
Soot Removal in PACIFIC PALISADES, California is the process of removing acidic smoke residue from walls, ceilings, framing, and contents before it etches surfaces or corrodes metal. Soot is not just dust. It is a mix of carbon, oils, and chemicals that bond to paint, drywall paper, and wood grain within hours. Our technicians use HEPA vacuums, soot sponges, and degreasers matched to the residue type, then seal what cannot be cleaned.
Most Pacific Palisades homes we see have one of three patterns: a kitchen grease fire that coated the range hood and upper cabinets, an electrical fire that left dry, powdery soot in the attic, or a wildfire smoke event that pushed residue through the HVAC system. If you are searching for professional soot removal near me PACIFIC PALISADES California, the first step is identifying which residue you have, because protein soot from grease fires needs different chemistry than the dry soot from a wood fire.
The service timeline
Our Soot Removal Process, Step by Step
The process flexes to the condition, but these checkpoints keep decisions clear.
Inspect and Test
We start with a thermal imaging camera and moisture meter to map where soot traveled and whether firefighting water is trapped in walls. We test residue type on a small patch, then write a scope that lists every affected room. Expect 45 to 90 minutes on site for a typical Pacific Palisades home.
Contain and Protect
Before any cleaning starts, we set up negative air machines and plastic containment to keep soot from spreading to clean rooms. Floors get protective covering, and we seal HVAC registers so the system does not pull residue into the ducts. This step typically takes 1 to 3 hours depending on square footage.
Remove the Soot
Technicians work top-down, dry-vacuuming with HEPA units first, then using soot sponges on walls and ceilings, and degreasers on kitchen surfaces. Porous materials like insulation and damaged drywall come out. We bag and haul debris the same day so it does not sit in your driveway.
Neutralize and Deodorize
After surfaces are clean, we apply encapsulant to sealed framing and run hydroxyl generators or thermal fogging to neutralize odor. This phase usually runs 12 to 24 hours with equipment left on site. You get a check-in call the next morning with results.
Verify and Walk Through
We do a final inspection with you, room by room, using a moisture meter and visual check on every surface we touched. You receive photo documentation and a cleanup report you can hand to your adjuster. Most jobs close out within 3 to 7 days from the first call.
Tools & methods
Tools and Methods We Use for Soot Removal
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
HEPA Vacuum
Pulls fine soot particles out of the air and off surfaces without blowing them back into the room. We use HEPA vacuums on every job before any wet cleaning starts.
Air Scrubber and Negative Air Machine
Creates containment pressure and filters the air throughout the job. This keeps soot from spreading to clean rooms and protects the people working on site.
Thermal Imaging Camera
Maps soot travel and finds hidden moisture from firefighting water. We use it during inspection so we do not miss a cavity or a wet wall.
Soda Blaster and Dry Ice Blaster
Removes soot from framing and hard-to-reach surfaces without damaging the material. We use these on attic framing and charred lumber where scrubbing would do more harm than good.
Hydroxyl Generator and Ozone Generator
Neutralizes odor molecules at the source. Hydroxyl generators are safe to run in occupied spaces; ozone generators are used only in unoccupied areas with proper ventilation.
Moisture Meter and Dehumidifier
Checks for hidden water from firefighting and dries the structure before we seal it. Sealing over moisture traps mold, so we test before we close anything up.
Soot Sponges and Degreasers
Lifts residue from walls, ceilings, and cabinets. We match the sponge and the degreaser to the residue type because protein soot and dry soot need different chemistry.
Use cases
When to Call for Soot Removal
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Electrical Fire in Huntington Palisades
An electrical fire in the attic left dry soot in the insulation and on the framing. The homeowner noticed a faint smoke smell every time the HVAC ran. → We removed the contaminated insulation, HEPA-vacuumed the framing, and sealed the lumber with encapsulant. We also cleaned the HVAC filter and ductwork. The smell was gone in three days.
Wildfire Smoke Event in Palisades Highlands
A wildfire smoke event pushed fine soot through the HVAC system of a hillside home. The house smelled like a campfire, and the closets and cabinets were coated with a fine film. → We cleaned the HVAC ducts, ran air scrubbers throughout the house, and treated the living space with hydroxyl generators. We also cleaned the closets and cabinets. The smoke smell was gone within 48 hours.
Problems we solve
Soot Problems We Solve in Pacific Palisades
Soot is not a one-size problem. The residue from a kitchen grease fire behaves differently than the soot from an electrical fire or a wildfire smoke event. Here are the most common soot problems we solve for Pacific Palisades homeowners.
Lingering smoke odor after fire
We find the source with a thermal camera and air sampling, remove the contaminated material, and treat the space with hydroxyl generators. Most Pacific Palisades jobs see a measurable odor reduction within 24 to 48 hours of treatment.
Hidden soot behind walls
We open cavities where needed, HEPA-vacuum the framing, and seal with encapsulant. We document what we find with photos so your insurance adjuster can see the scope.
Smoke-damaged HVAC system
We clean the HVAC filter and ductwork, then run air scrubbers to clear the system. We also seal registers during containment so the system does not pull more soot during the job.
Soot on painted walls and ceilings
We test a small area first, then use chemical soot sponges and pH-matched degreasers to lift the residue. If the drywall paper is compromised, we cut out and replace the damaged section.
Pricing process
What Soot Removal Costs in Pacific Palisades
$450 - $3,500 depending on scope
Square footage affected
A single room takes less time and material than a whole floor. Most single-room jobs run 4 to 8 hours of active cleaning, while whole-home jobs take 3 to 7 days.
Residue type
Protein soot from grease fires needs different chemistry than dry soot from electrical fires. The wrong chemistry can damage surfaces, so we match the method to the residue.
HVAC and duct cleaning
If soot has entered the HVAC system, duct cleaning adds $400 to $900 depending on the size of the system and the number of vents.
How much does soot removal cost in PACIFIC PALISADES, California?
Most soot removal jobs in Pacific Palisades run $450 to $3,500 in 2026, with the average whole-home cleanup landing near $1,800. Small kitchen or single-room jobs sit at the low end. Whole-house jobs with HVAC cleaning, attic soot, and content packing push toward the top. Your insurance carrier often covers most of it, and we write the scope in Xactimate so the numbers line up with what the adjuster expects.
Can soot be removed from painted walls in PACIFIC PALISADES?
Yes, in most cases. Painted drywall can usually be cleaned with a chemical soot sponge and a pH-matched degreaser, then sealed with an encapsulant. The exception is flat paint with heavy protein soot, which can stain permanently. We test a small area first and tell you honestly whether cleaning or repainting is the better call. If the drywall paper is compromised, we cut out the damaged section and replace it.
Is soot removal safe to do yourself in PACIFIC PALISADES, California?
No. DIY soot cleanup usually makes things worse. Household vacuums blow fine soot particles back into the air, and the wrong cleaner can set a stain permanently. Soot also carries carcinogens, and attics and wall cavities can hide both soot and firefighting water. Our team uses HEPA vacuums, air scrubbers, and personal protective equipment, and we test for moisture before we close anything up.
How long does soot removal take in PACIFIC PALISADES, California?
A single room takes 4 to 8 hours of active cleaning. A whole-home soot cleanup in Pacific Palisades typically runs 3 to 7 days from start to final walkthrough, with deodorization equipment running overnight. If the job includes structural repair after fire or HVAC duct cleaning, add 2 to 4 days. We give you a written timeline before we start and call you if anything changes.
Ready when you are
Get Soot Removal in PACIFIC PALISADES, California Today
Soot damage gets worse by the hour. Call (833) 929-6186 now and we will give you a real arrival window, a written scope, and a crew that has done this before. We are licensed, insured, and we bill insurance directly.

Talk with the local team
Request Soot Removal
Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.


