
Soot, ash, and smoke removed by certified techs, 24/7
Fire Damage Clean Up in PACIFIC PALISADES, California
Fire Damage Clean Up in PACIFIC PALISADES, California starts with a call and ends with a testable, breathable home. We pull charred debris, HEPA-vacuum every surface, scrub soot from framing, and run air scrubbers until the smoke odor is gone, not masked. Whether you're in the Alphabet Streets or up in Palisades Highlands, our fire cleanup in PACIFIC PALISADES, California crew is on call around the clock.
What's included
What's Included in Fire Damage Clean Up
Every fire damage clean up in PACIFIC PALISADES, California includes the core scope below. Structural repairs, contents packing, and reconstruction are quoted separately after the initial scope, so you see the numbers before we start.
Emergency Board-Up and Tarping
Windows, doors, and roof openings secured with plywood and tarps within hours of your call. This stops rain intrusion and looting and protects the structure until cleanup begins.
Debris and Char Removal
Charred framing, insulation, drywall, and contents removed and hauled away. We separate salvageable items from debris and document both for your insurance claim.
Soot and Surface Cleaning
HEPA vacuuming, soot sponges, and degreasers on walls, ceilings, cabinets, and fixtures. We use soda blasting or dry ice blasting on framing we are keeping.
Air Scrubbing and Odor Treatment
Air scrubbers with HEPA and carbon filters run continuously, followed by thermal fogging and hydroxyl or ozone treatment to break down smoke odor at the source.
Moisture Control
Dehumidifiers and air movers dry the structure after firefighting water. Moisture meters confirm the framing is dry before we close up walls.
Documentation and Final Walkthrough
Photo documentation, Xactimate scope, and a room-by-room walkthrough with you before we pull equipment. If the smoke odor lingers, we treat again.
Service overview
What Fire Damage Clean Up in PACIFIC PALISADES, California Covers
Fire Damage Clean Up in PACIFIC PALISADES, California is the physical work of removing everything a fire leaves behind: charred lumber, melted insulation, soot film on drywall, ash in HVAC returns, and the acrid smoke that soaks into fabric and framing. It is not a wipe-down. We use thermal imaging cameras to find hidden soot behind walls, HEPA vacuums on every surface, and air scrubbers with HEPA and carbon filtration to pull particles out of the air. Drywall saws open cavities so we can reach smoke that settled where you cannot see it.
Most Pacific Palisades fires we see start small: a kitchen grease fire, an electrical fire in a 1950s ranch home, or an attic fire that smolders in old lumber before anyone smells it. Then the fire department leaves, and the real damage starts compounding. Soot is acidic and etches within 72 hours. Water from hoses feeds mold in 24 to 48 hours. That is why our post fire cleanup PACIFIC PALISADES crews move fast, and why we bring dehumidifiers and moisture meters on the first visit, not the third.
The service timeline
How Our Fire Cleanup Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Board-Up
We arrive, secure windows, doors, and roof openings with plywood and tarps, and post the property. This stops looters and rain intrusion. Most Pacific Palisades board-ups are done within 2 to 4 hours of your call, day or night.
Scope and Documentation
A project manager walks the house with a thermal imaging camera and moisture meter, photographs every affected surface, and writes the scope in Xactimate. You get a clear picture of what is damaged, what is salvageable, and what the insurance claim should cover.
Debris and Soot Removal
Crews pull charred framing, insulation, and drywall, then HEPA-vacuum every surface. Soot sponges and degreasers handle the film on walls and cabinets. A soda blaster or dry ice blaster removes char from framing we are keeping without gouging the wood.
Air and Odor Treatment
Air scrubbers with HEPA and carbon filters run continuously. Negative air machines keep dust from spreading to clean rooms. We follow with thermal fogging, then a hydroxyl generator or ozone generator for the stubborn smoke odor that settled into insulation and fabric.
Final Verification
We re-meter moisture, re-sniff every room, and walk the property with you. If the smoke odor lingers, we treat again before we pull equipment. Most jobs run 5 to 10 days from board-up to final walkthrough, depending on square footage and how far smoke traveled.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal Imaging Camera
Finds hidden soot behind walls and moisture from firefighting water. It shows us where to open cavities before we cut.
HEPA Vacuum
Captures fine soot and ash particles instead of spreading them. A shop vac blows them back into the air; a HEPA vacuum does not.
Air Scrubber and Negative Air Machine
Filters airborne particles and keeps dust from migrating into clean rooms. We run them continuously during demolition and cleaning.
Ozone Generator and Hydroxyl Generator
Breaks down smoke odor molecules at the source. Hydroxyl generators are safe for occupied spaces; ozone generators are used in unoccupied spaces only.
Soda Blaster and Dry Ice Blaster
Removes char from framing we are keeping without gouging the wood. Both are gentler than sandblasting and leave a clean surface for sealant.
Dehumidifier and Moisture Meter
Dries the structure after firefighting water and confirms the framing is dry before walls go back up.
Thermal Fogging Equipment
Pushes thermal fogging solution into cavities, ductwork, and fabric where smoke odor settles. It reaches places a spray bottle cannot.
Use cases
When to Call for Fire Damage Clean Up
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Fire, Palisades Highlands
An electrical fire smoldered in the attic framing for hours before anyone smelled it. Charred lumber, melted insulation, and smoke damage spread through the attic envelope and into the second-floor ceiling. → We opened the attic, removed charred framing and insulation, soda-blasted the framing we kept, and treated the whole envelope with a fogger and hydroxyl generator. The attic was clean and deodorized in 8 days, ready for the repair phase.
Electrical Fire with Water Damage, Marquez Knolls
An electrical fire in a hallway wall brought 400 gallons of firefighting water into the framing. Soot coated the hallway, and the moisture meter read high on three walls within hours of the fire. → We dried the framing with dehumidifiers and air movers while we cleaned soot, then re-metered before closing walls. No mold grew behind the drywall, and the hallway was repainted and back in service in 10 days.
Problems we solve
Problems Our Fire Cleanup Near Me Crews Solve
Most fire damage calls we get in Pacific Palisades are not about the flames. They are about what the fire left behind and what happens if nobody deals with it fast.
Smoke odor that comes back weeks later
We use thermal fogging solution, hydroxyl generators, and charcoal odor absorbers to break down the molecules at the source, then verify with a sniff test before we pull equipment.
Hidden soot behind walls and in the HVAC
A thermal imaging camera and moisture meter find the hidden damage. We open cavities with a drywall saw, clean the framing, replace HVAC filters, and clean the ductwork.
Mold after firefighting water
We bring dehumidifiers and air movers on the first visit, not the third. Moisture meters confirm the framing is dry before we close anything up, following ANSI/IICRC S500.
Insurance claim disputes over scope
We scope in Xactimate and photograph every affected surface before and after. That paper trail is why our claims tend to move through approval with fewer supplements.
Pricing process
What Fire Damage Clean Up Costs
$3,500 - $18,000 depending on scope
Square footage affected
A contained kitchen fire is a different job than a whole-house smoke event. Square footage drives labor, equipment run time, and the amount of debris we haul away.
How far smoke traveled
Smoke moves through HVAC systems and shared walls. If it reached the second floor or the attic, the scope grows. A thermal imaging camera tells us how far it went before we quote.
Hidden damage found
Soot behind walls and moisture from firefighting water are the two biggest cost variables. We meter and image the structure during the initial scope so the quote reflects what is actually there.
How much does fire damage clean up cost in PACIFIC PALISADES California?
Most residential fire damage clean up in PACIFIC PALISADES, California runs $3,500 to $18,000 in 2026, with the average job around $8,000. Small kitchen fires with limited soot often land near $3,500 to $6,000. Whole-house jobs with attic involvement and HVAC contamination push past $15,000. Insurance usually covers the bulk of it. We scope in Xactimate so your adjuster sees the same numbers we do.
What does fire cleanup include in PACIFIC PALISADES?
Fire cleanup in PACIFIC PALISADES includes board-up, debris removal, HEPA vacuuming, soot and char removal, air scrubbing, odor treatment, and final verification. We pull charred drywall and insulation, clean salvageable framing with soda blasting or dry ice blasting, and run air scrubbers and hydroxyl generators until the smoke odor is gone. We also document everything for your insurance claim.
Can I clean up fire damage myself in PACIFIC PALISADES California?
You can handle a small, contained fire with no structural damage, but most jobs need professional equipment. Soot is acidic and etches within 72 hours, and a shop vac spreads fine particles instead of capturing them. Hidden soot behind walls and smoke in the HVAC system are the two things DIY misses most. If the fire department used water, you also have 24 to 48 hours before mold starts.
How long does fire damage cleanup take in PACIFIC PALISADES?
Most fire damage cleanup in PACIFIC PALISADES takes 5 to 10 days from board-up to final walkthrough. A contained kitchen fire with limited soot can finish in 3 to 5 days. A whole-house job with attic damage, HVAC contamination, and structural repairs runs 2 to 4 weeks. We give you a written timeline after the initial scope and update it as the job progresses.
Ready when you are
Call Now for Fire Damage Clean Up in PACIFIC PALISADES, California
Soot etches within 72 hours and mold starts in 24 to 48 hours after firefighting water. Every hour you wait makes the job bigger. Call our line, get a real person, and get a board-up crew on the way. We are licensed, insured, and IICRC-certified.

Talk with the local team
Request Fire Damage Clean Up
Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.



