
We pull smoke odor out of walls, ducts, and furniture - not just cover it up
Odor Removal After Fire in PACIFIC PALISADES, California
Odor Removal After Fire in PACIFIC PALISADES, California means finding every pocket of soot and smoke residue and neutralizing it, not masking it with fragrance. We handle homes and businesses from the Alphabet Streets to the Highlands, using thermal fogging, ozone, and HEPA air scrubbing to clear the smell at the source. If your house still smells like a campfire weeks after the flames are out, call us at (833) 929-6186.
What's included
What Odor Removal After Fire Includes
Our standard odor removal scope covers source identification, soot and residue removal, and odor neutralization through thermal fogging, ozone, or hydroxyl treatment. Structural repair, drywall replacement, and contents packing are separate scopes we can quote on the same visit. Here is what is included in the base odor job.
Thermal imaging and odor mapping
We walk the structure with a thermal imaging camera and moisture meter to find where smoke traveled and where residue is still off-gassing. This is what separates a real scope from a guess.
HEPA vacuuming and soot sponging
Every cleanable surface gets HEPA vacuumed, then wiped with soot sponges and degreaser. This pulls the acidic film that keeps the smoke smell alive.
Thermal fogging and ozone treatment
We run thermal fogging to reach wall cavities and ductwork, then ozone or hydroxyl generators to break down the remaining gas molecules. Treatment cycles run 8 to 24 hours.
HVAC filter and duct cleaning
We pull and replace HVAC filters and clean accessible ductwork so the system stops redistributing soot every time it cycles. This is often the difference between a job that holds and one that does not.
Clearance re-test and written summary
We re-check the structure before pulling containment and give you a written summary of what was treated, what was removed, and what to watch for. That summary goes in your insurance file.
Service overview
What Odor Removal After Fire in PACIFIC PALISADES, California Involves
Odor Removal After Fire in PACIFIC PALISADES, California is the process of locating and neutralizing smoke residue that has soaked into drywall, insulation, lumber and framing, HVAC ducts, upholstery, and even the subfloor. Smoke particles are microscopic and acidic; they settle into porous materials and keep off-gassing for months. We use a thermal imaging camera and moisture meter to map where the residue traveled, then match the treatment - HEPA vacuuming, soot sponges, chemical degreasers, encapsulant, thermal fogging, or ozone - to each surface. It is not a spray-and-go job.
Most Pacific Palisades homes that need smoke odor removal PACIFIC PALISADES California are dealing with one of three scenarios: a kitchen grease fire that sent vapor through the whole house, an attic or electrical fire where charred framing sits behind drywall, or water damage from firefighting that turned into mold and made the smell worse. Coastal humidity here holds odor in fabrics and wood longer than in drier inland areas. If you are searching for odor removal after fire near me PACIFIC PALISADES California, the first step is a walk-through that identifies every source, not just the room where the fire started.
The service timeline
How Our Odor Removal Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Assessment
We arrive, walk the structure with a thermal imaging camera and moisture meter, and identify every odor source - charred framing, smoke-damaged HVAC, soaked insulation, or water from firefighting. You get a written scope and a start time the same day.
Containment and Air Control
We set negative air machines and air scrubbers with HEPA filtration to stop soot particles from migrating into clean rooms. Plastic containment goes up around the work zone. This stage typically runs 2 to 4 hours depending on square footage.
Soot and Residue Removal
Technicians HEPA vacuum all surfaces, then use soot sponges and degreaser on walls, ceilings, and framing. Where charred material cannot be cleaned, we cut out drywall and insulation and bag it for disposal. Soda blasting or dry ice blasting handles heavy char on lumber.
Odor Neutralization
We run thermal fogging to reach cavities behind walls and inside ducts, then ozone or hydroxyl generators to break down the remaining gas molecules. Treatment runs 8 to 24 hours depending on volume and how long the smoke had to soak in.
Clearance and Re-Test
We re-sniff the structure with a trained nose and, where needed, a handheld gas detector. If any odor remains, we repeat targeted treatment before we pull containment. You get a final walk-through and a written summary for your insurance file.
Tools & methods
Equipment and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds temperature differences that reveal hidden soot, moisture, and smoke migration behind walls and in ceilings.
HEPA vacuum and air scrubber
Captures fine smoke particles instead of pushing them around. Air scrubbers run continuously during containment to keep the air clean.
Ozone generator and hydroxyl generator
Breaks down odor-causing gas molecules. Ozone is used in unoccupied spaces; hydroxyl is used where occupants or pets need to stay nearby.
Thermal fogger
Pushes a fogging solution into wall cavities, ductwork, and other spaces a spray bottle cannot reach.
Soda blaster and dry ice blaster
Removes heavy char from framing and masonry without gouging the wood, so structural lumber can be saved instead of replaced.
Dehumidifier and negative air machine
Dries water from firefighting and keeps containment under negative pressure so soot does not migrate into clean rooms.
Moisture meter
Confirms whether framing and drywall are dry enough for odor treatment to hold, and flags areas that need more drying time.
Use cases
When to Call for Odor Removal After Fire
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Fire, Marquez Knolls
An electrical fire in the attic was put out quickly, but the insulation and roof sheathing were saturated with smoke. The bedrooms below smelled like smoke every time the wind picked up, and repainting did not help. → We removed the saturated insulation, soda-blasted the charred framing, sealed the sheathing, and treated the attic with thermal fogging. The bedrooms cleared within 72 hours of treatment, and new insulation went in on day eight.
Apartment Fire, Palisades Highlands
A bedroom fire in one unit affected three units through the shared HVAC. Two neighboring tenants reported smoke smell, and the landlord was facing three separate insurance claims. → We tested all three units, treated the affected ductwork, and ran hydroxyl generators in the occupied units. All three cleared within six days, and the landlord re-rented the units within two weeks.
Problems we solve
Smoke Odor Problems We Solve in Pacific Palisades
Most odor complaints we get are not about the room where the fire happened. They are about the smell that came back a week later from a cavity, a duct, or a piece of furniture nobody treated. Here are the problems we see most often.
Smoke smell returns when the heater runs
We pull and replace filters, clean the accessible ductwork, and treat the blower and coil area. Then we run air scrubbers during treatment so the system is clean before it goes back into service.
Hidden soot behind walls and baseboards
We use thermal imaging to find the hot spots, open the affected bays, remove charred insulation, and treat the cavity with thermal fogging before closing it back up.
Mold after fire and water damage
We dry the structure first with dehumidifiers and air movers, treat any mold growth, then run odor neutralization. Doing it in the wrong order traps moisture and odor together.
Insurance claim disputes over odor scope
We document with photos, moisture readings, and Xactimate line items that show what was affected and why treatment was necessary. That file gives your adjuster what they need to approve the scope.
Pricing process
What Odor Removal Costs in Pacific Palisades
$1,200 - $4,500 depending on scope
Square footage affected
A single room costs less than a whole-house job because containment, air scrubbing, and ozone treatment all scale with volume. Most single-room jobs run $1,200 to $1,800.
Ductwork and HVAC cleaning
Duct cleaning adds $400 to $900 depending on the number of runs and whether the blower and coil need to be pulled. Skipping it is the most common reason smoke smell returns.
Attic and insulation removal
Saturated attic insulation has to be removed and replaced, which adds material and disposal cost. Attic jobs typically add $800 to $2,000.
How much does odor removal after a fire cost in PACIFIC PALISADES California?
Most residential odor jobs in Pacific Palisades run $1,200 to $4,500 in 2026, depending on square footage, how many rooms were affected, and whether ductwork or attic insulation needs treatment. A single-room kitchen fire with light residue sits at the low end; a whole-house job with HVAC cleaning and ozone treatment sits at the high end. We give you a written scope before we start.
How long does it take to remove smoke smell in PACIFIC PALISADES?
Light smoke odor in one or two rooms clears in 2 to 4 days. A whole-house job with attic or ductwork involvement takes 5 to 10 days, mostly because ozone and thermal fogging cycles run 8 to 24 hours each and materials need time to dry. We give you a day-by-day schedule at the walk-through so you can plan.
Can smoke odor be removed from furniture in PACIFIC PALISADES California?
Yes, in most cases. Upholstery, wood furniture, mattresses, and rugs can usually be saved with HEPA vacuuming, soot sponges, and a controlled ozone or hydroxyl chamber treatment. Pieces with heavy char or foam that has absorbed water from firefighting are usually a replacement call. We assess each piece and tell you which is which before we treat anything.
Does ozone treatment remove fire odor in PACIFIC PALISADES California?
Ozone is one of the most effective tools we have for fire odor, but it only works after the soot and residue are physically removed. We use it in unoccupied spaces for 8 to 24 hours, then ventilate and re-test. Ozone does not replace HEPA vacuuming or soot sponging; it finishes the job those steps start.
Ready when you are
Get Odor Removal After Fire in PACIFIC PALISADES, California
Smoke odor does not fade on its own, and every day it sits it soaks deeper into insulation, framing, and furniture. Call (833) 929-6186 for a same-day assessment and a written scope. We are licensed, insured, and available 24/7.

Talk with the local team
Request Odor Removal After Fire
Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.


