
Board-up, soot removal, and smoke odor control, 24/7
Fire Damage Restoration Near Me in PACIFIC PALISADES
Fire Damage Restoration Near Me in PACIFIC PALISADES means a crew on your property the same day, not a call center reading a script. We board up the opening, pull smoke out of the framing, and stop the water damage from the hoses before it turns into mold. If you are searching for local fire damage restoration in PACIFIC PALISADES, California, we handle the insurance paperwork and the cleanup under one roof.
What's included
What Fire Damage Restoration Near Me Includes
The core scope covers emergency response, board-up, water extraction, soot and char removal, smoke odor treatment, and the structural rebuild. Contents packing and storage, duct replacement, and full HVAC cleaning are quoted separately because the cost varies so much from house to house. We tell you which bucket each line item falls into before you sign anything.
Emergency Board-Up and Tarp
Plywood over the openings, tarp over the roof damage, and temporary fencing where the site is exposed. We photograph the condition before we touch anything so the insurance file shows the loss as we found it.
Water Extraction and Dry-Out
Truck-mounted extraction for standing water, then dehumidifiers and air movers on the wet framing. We meter the walls daily and do not close anything up until the readings are back to a normal dry standard.
Soot and Char Removal
HEPA vacuum, soot sponges, degreaser, and dry ice or soda blasting on the framing. We remove the char down to sound material so the encapsulant and the new finishes have something to bond to.
Smoke Odor Treatment
Air scrubbers and hydroxyl generators for 24 to 72 hours, thermal fogging in the wall cavities, and charcoal odor absorbers in the closed spaces. We do not call the job done until the smell test passes in every room.
Structural Rebuild
Drywall, insulation, lumber and framing, roofing shingles, paint and primer, sealant and caulk. Permitted work, inspected by the local authority, and finished to match the rest of the house.
Insurance Documentation
Photos, moisture meter readings, thermal images, and an Xactimate estimate formatted for the adjuster. We meet the carrier on site and answer their questions directly so you are not the messenger.
Service overview
What Fire Damage Restoration Near Me in PACIFIC PALISADES Covers
Fire Damage Restoration Near Me in PACIFIC PALISADES is the trade work of putting a house back together after a fire: emergency board-up, soot and char removal, smoke odor neutralization, water extraction from firefighting, and structural repair. It is not a cleaning service. We open walls to check for hidden soot behind the drywall, run thermal imaging cameras to find hot spots the eye misses, and dry the framing before we ever talk about paint.
Most of the calls we take in Pacific Palisades start the same way: a kitchen grease fire that flashed up the cabinet run, an electrical fire in a 1960s panel, or an attic fire that smoldered in the insulation for an hour before anyone smelled it. If you need nearby fire damage restoration services in PACIFIC PALISADES California, the clock matters. Soot turns acidic within 48 to 72 hours and starts etching finishes, and the water from the hoses feeds mold in about the same window.
The service timeline
What to Expect After You Call
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency Call
You call (833) 929-6186 and we ask three questions: what burned, how much water went on it, and is the structure safe to enter. We dispatch a crew and give you an arrival window. In most of Pacific Palisades that is 60 to 90 minutes, day or night.
Board-Up and Dry-Out
First hour on site is security and water. We tarp the roof, plywood the openings, and set dehumidifiers and air movers on the wet rooms. Firefighting water soaks into subfloor and wall cavities, and that moisture has to come out before any rebuild starts.
Soot and Smoke Map
We walk the house with thermal imaging cameras and a moisture meter, then mark every soot-affected surface. That map drives the cleaning plan and the insurance scope. Hidden soot behind walls and above ceiling tiles is where most amateur cleanups fail inspection.
Clean, Blast, and Fog
HEPA vacuum first, then soot sponges and degreaser on the washable surfaces. Charred framing gets soda blasting or dry ice blasting. Then we seal the cavities with encapsulant and run thermal fogging solution through the air to kill the smoke smell at the source.
Rebuild and Walk-Through
Drywall, insulation, paint and primer, trim, and roofing shingles go back in. We pull the permits the California Contractors State License Board requires and meet the inspector on site. Final walk-through is with you, room by room, before we call the job done.
Tools & methods
Tools and Methods We Use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Thermal imaging camera
Finds hot spots and hidden soot behind walls and above ceilings that the eye cannot see. It is how we decide where to open the wall instead of guessing.
Air scrubber and negative air machine
Pulls smoke particles out of the air and keeps them from migrating into clean rooms. We run negative pressure on the affected zone so the rest of the house stays livable during the work.
Hydroxyl generator and ozone generator
Neutralizes smoke odor at the molecular level. Hydroxyl units run in occupied spaces; ozone runs only in unoccupied ones. Treatment usually runs 24 to 72 hours.
Dry ice blaster and soda blaster
Strips char and soot off framing and masonry without gouging the wood. That is often the difference between saving a wall cavity and tearing it out.
Moisture meter and Dri-Eaz dehumidifier
Measures the water left in the framing after firefighting and pulls it out. We log readings daily and do not close a wall until the numbers are back to dry standard.
HEPA vacuum and soot sponges
The first pass on every surface. HEPA vacuuming before wiping keeps the soot from smearing into the finish, and soot sponges lift the dry residue off without solvent.
Use cases
When to Call for Fire Damage Restoration
These examples show how the service framework adapts rather than forcing every call through one repair.

Attic Fire, Palisades Highlands
An attic fire smoldered in the insulation overnight. The roof deck was charred across a 12-foot section, two rafters lost load capacity, and the smoke had pushed down into the second-floor bedrooms through the ceiling penetrations. → We replaced the two rafters and the charred sheathing, re-insulated to current code, re-roofed the section, and fogged the attic and the second floor. The roof passed inspection and the bedrooms tested clean for smoke odor.
Electrical Fire, Huntington Palisades
An electrical fire started inside a bedroom wall in a 1930s bungalow. The visible damage was about two square feet, but the smoke smell was through the whole upstairs and the char had run up the balloon-frame cavity toward the attic. → We opened the wall along the wiring path, blasted the char out of the framing, sealed the cavity, and treated the upstairs with hydroxyl generators. A licensed electrician repaired the circuit. The repair was permitted, inspected, and closed in 3 weeks.
Problems we solve
Problems We Solve After a Fire
If you are looking for cheap fire damage restoration near me PACIFIC PALISADES, be careful what you are buying. The low bid usually skips the moisture readings, the cavity fogging, or the permit. Those are the three things that come back to cost you more six months later.
Smoke odor that comes back weeks later
We treat the source: air scrubbers and hydroxyl generators on the air, thermal fogging in the cavities, and charcoal odor absorbers in the closed spaces. If the odor returns within 30 days of our walk-through, we re-treat at no charge.
Hidden soot behind walls and above ceilings
We map the soot with thermal imaging cameras and open the wall cavities where the readings point. The char gets blasted or cut out, the cavity gets sealed with encapsulant, and the wall goes back together clean.
Mold after fire and water damage
We extract the standing water the same day and set dehumidifiers and air movers immediately. Daily moisture meter readings tell us when the framing is dry, and we follow ANSI/IICRC S500 and S520 on every job.
Insurance claim disputes over scope
We write the scope in Xactimate, photograph every affected surface, and keep the moisture and thermal records. When the adjuster questions a line item, we send the evidence the same day.
Pricing process
What Fire Damage Restoration Costs
$3,500 - $80,000+ depending on scope
How much framing burned
Charred studs and rafters have to be cut out and replaced to code. Every linear foot of framing that comes out adds labor, material, and inspection time to the job.
How much water went in
Firefighting water soaks the subfloor and the wall cavities. The longer the framing stays wet, the more drying equipment and the more days on the job. Mold adds a whole second scope.
Whether the HVAC ran
If the system was running during the fire, soot went into every room the ducts serve. Duct cleaning and filter replacement get added to the scope, and sometimes the ductwork gets replaced.
How much does fire damage restoration near me cost in PACIFIC PALISADES?
Typical 2026 pricing in this area runs $3,500 to $12,000 for a single-room fire, and $25,000 to $80,000 or more for a whole-house rebuild. The big variables are how much structural framing burned, how much water the hoses put in the walls, and whether the HVAC system pulled smoke through the ducts. We give you a written scope before any work starts, and most of it goes through your insurance carrier.
Is there 24/7 fire damage restoration near me in PACIFIC PALISADES California?
Yes. We answer the phone at (833) 929-6186 around the clock, including holidays, and we dispatch a crew the same night. Most Pacific Palisades addresses see a technician within 60 to 90 minutes. If you need fire damage restoration near me open now PACIFIC PALISADES California, call and we will give you a real arrival window, not a four-hour block.
Does fire damage restoration near me work with insurance in PACIFIC PALISADES California?
We work directly with your carrier and document the loss in Xactimate, the estimating format most adjusters use. You file the claim, we meet the adjuster on site, and we send photos, moisture meter readings, and thermal images to support the scope. We have handled claims alongside Servpro, ServiceMaster Restore, BELFOR, and Paul Davis Restoration, so we know what each carrier tends to question.
How long does fire damage restoration take in PACIFIC PALISADES?
A single room with light smoke damage is usually 5 to 10 days. A kitchen fire with cabinet and drywall loss runs 3 to 6 weeks. A whole-house fire with structural framing damage can run 3 to 6 months once permits and inspections are in the schedule. The dry-out and odor phase is the fastest part; the rebuild is what takes time.
Ready when you are
Call for Fire Damage Restoration Near Me in PACIFIC PALISADES
We answer the phone 24/7 and dispatch a crew with board-up materials and extraction equipment already on the truck. Licensed, insured, and bonded, with a written scope before any work starts. Call (833) 929-6186 and we will give you a real arrival window.

Talk with the local team
Request Fire Damage Restoration Near Me
Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.



