Fire and Flood Restoration

When fire meets water, we dry, clean, and rebuild - 24/7.

Fire and Flood Restoration in PACIFIC PALISADES, California

Fire and Flood Restoration in PACIFIC PALISADES, California is a dual-threat recovery service for homes and businesses hit by fire, smoke, and the water left behind by firefighting. We extract standing water, dry structural cavities, neutralize soot and odor, and rebuild what the flames took. If you are searching for fire and water damage restoration near me PACIFIC PALISADES California, our crew is on call around the clock.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Fire and Flood Restoration Includes

Every dual-damage job includes emergency response, water extraction, structural drying, soot and smoke removal, odor neutralization, and a written scope for rebuild. Add-ons like contents packing, duct cleaning, and furniture restoration are quoted separately based on scope. Here is what is covered in a standard job.

01

Emergency Board-Up and Tarping

We secure openings and tarp exposed roof areas to prevent further damage from weather or intrusion. This is done on arrival, before extraction begins, so the structure is protected while we work.

02

Water Extraction and Drying

Truck-mounted extractors remove standing water, and Dri-Eaz and Phoenix air movers and dehumidifiers dry framing, drywall, and subfloor. Daily moisture readings confirm progress until dry standard is reached.

03

Soot and Smoke Removal

Soot sponges, HEPA vacuums, and soda blasting remove char and residue from surfaces and framing. Thermal fogging and hydroxyl generators neutralize odor in cavities and ducts.

04

Mold Prevention Treatment

We apply antimicrobial treatments to wet framing and drywall after extraction to prevent mold colonization. This follows ANSI/IICRC S520 guidance and is done before drying equipment is removed.

05

Insurance Documentation

Every affected room is photographed, moisture readings are logged, and materials are itemized in Xactimate format. This documentation supports your claim and speeds adjuster approval.

06

Rebuild Coordination

We handle drywall, insulation, paint, trim, and flooring replacement under one scope. Permits are pulled through the California Contractors State License Board as required, and a final walkthrough confirms the job is complete.

Service overview

What Fire and Flood Restoration in PACIFIC PALISADES, California Involves

Fire and Flood Restoration in PACIFIC PALISADES, California is the coordinated recovery of a property damaged by both fire and the water used to put it out. It combines emergency water extraction, structural drying, soot and smoke removal, odor neutralization, and structural repair in one sequence. The order matters: water first, because mold can colonize wet drywall and framing within 24 to 48 hours, then smoke and soot, then rebuild. Our technicians use thermal imaging cameras and moisture meters to map hidden saturation behind walls and under floors before any drying equipment is placed.

In PACIFIC PALISADES, the dual-damage scenario is common. A kitchen grease fire gets knocked down with a hose, and suddenly the same house has charred framing in the kitchen, smoke-damaged HVAC ducts, and 40 gallons of water soaking into the subfloor. Hillside homes in Marquez Knolls and Castellammare add slope drainage issues that can worsen water intrusion after a fire. If you are searching for fire and flood damage cleanup PACIFIC PALISADES, we handle both losses under one scope so you are not coordinating two contractors.

One Crew, One ScopeYou do not have to coordinate a fire crew and a water crew. Our team handles extraction, drying, soot removal, and rebuild under one work order. That means one point of contact, one schedule, and one set of documentation for your insurance adjuster.
Mold Stopped in 48 HoursWater from firefighting soaks into drywall, insulation, and lumber. We deploy dehumidifiers and air scrubbers within hours of arrival, targeting the 24-to-48-hour window before mold colonizes. Moisture meters confirm dry standard before we close any wall cavity.
Odor Gone, Not MaskedSmoke odor lingers in insulation, upholstery, and HVAC ducts long after visible soot is wiped away. We use hydroxyl generators and thermal fogging to neutralize odor molecules at the source, not cover them with fragrance. Charcoal odor absorbers stay in place during the drying phase.
Fire Damage Restoration Pacific Palisades — Fire Damage Restoration you can rely on
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

Our Fire and Flood Restoration Process

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Emergency Response

We arrive within 60 to 90 minutes of your call for most PACIFIC PALISADES addresses. The first priority is safety: we shut off utilities if needed, board up openings, and tarp the roof if fire damage exposed the structure. You get a written scope and upfront pricing before work begins.

Stage 1
02

Water Extraction

Truck-mounted extractors pull standing water from flooring, carpet, and subfloor. We use moisture meters and thermal imaging to find hidden saturation behind baseboards and under cabinets. Extraction typically takes 2 to 4 hours depending on volume.

Stage 2
03

Structural Drying

We place Dri-Eaz and Phoenix air movers and dehumidifiers to dry framing, drywall, and insulation. Negative air machines contain dust and soot particles during the process. Drying typically runs 3 to 5 days, with daily moisture readings to confirm progress.

Stage 3
04

Soot and Smoke Removal

Technicians use soot sponges, HEPA vacuums, and soda blasting on charred framing. Thermal fogging and hydroxyl generators neutralize smoke odor in ducts and cavities. We replace HVAC filters and clean ductwork when smoke has entered the system.

Stage 4
05

Rebuild and Walkthrough

Drywall, insulation, paint, and trim are replaced to code. We pull permits through the California Contractors State License Board as required. The final walkthrough confirms moisture readings are at dry standard and odor is gone before we close the job.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Thermal Imaging Camera

Maps hidden water saturation behind walls and under floors without demolition. Used during initial assessment and daily monitoring.

02

Dri-Eaz and Phoenix Dehumidifiers

Removes moisture from the air to speed structural drying. Sized to the cubic footage of each affected room.

03

Air Scrubbers and Negative Air Machines

Contains soot and dust particles during demolition and drying. Prevents cross-contamination between clean and affected areas.

04

Hydroxyl and Ozone Generators

Neutralizes smoke odor molecules in cavities, ducts, and soft goods. Hydroxyl generators are safe for occupied spaces.

05

Soda Blaster

Removes char and soot from framing without damaging the wood surface. Used on exposed studs and joists after demolition.

06

Moisture Meter

Confirms dry standard in drywall, framing, and subfloor. Readings are logged daily and shared with your adjuster.

07

HEPA Vacuum

Captures fine soot and ash particles from porous surfaces. Used before wet cleaning to avoid smearing residue.

Use cases

When to Call for Fire and Flood Restoration

These examples show how the service framework adapts rather than forcing every call through one repair.

Fire and Flood Restoration
Kitchen Fire with Sprinkler WaterA grease fire charred cabinets and triggered the sprinkler system, leaving 40 gallons of water on hardwood flooring. Smoke residue coated walls and ceiling, and the subfloor was saturated. → We extracted water, dried the subfloor to dry standard in 4 days, removed char with soda blasting, and replaced cabinets and flooring. The kitchen was rebuilt and odor-free in 18 days.

Attic Fire in Palisades Highlands

An electrical fire in the attic burned through insulation and charred roof framing. Firefighting water soaked the ceiling assembly and second-floor rooms below, and smoke odor spread through HVAC ducts. → We dried the ceiling assembly in 5 days, replaced burned insulation and roofing shingles, cleaned ductwork, and treated the attic with hydroxyl generators. Rebuild finished in 4 weeks.

Bedroom Fire with Smoke Damage

A bedroom fire left charred walls, smoke-damaged furniture, and water in the hallway carpet from firefighting. Odor had settled into the mattress and curtains. → We removed burned textiles, extracted water from the carpet, dried the subfloor, and treated the room with thermal fogging. Walls were rebuilt and painted in 10 days.

Problems we solve

Problems We Solve After Fire and Water Damage

Dual-damage jobs create problems that single-service contractors miss. Smoke hides in cavities, water soaks into framing, and mold starts before the rebuild begins. Here is what we fix.

ISSUE

Smoke odor lingering after fire

We use hydroxyl generators and thermal fogging to break down odor molecules in cavities and ducts, then replace HVAC filters and clean ductwork. Charcoal odor absorbers stay in place during drying to capture residual particles.

SYMPTOM

Hidden soot behind walls

We open wall cavities where needed, clean framing with soot sponges and soda blasting, and replace insulation that cannot be cleaned. Negative air machines contain particles during the process.

SIGN

Water damage from firefighting

We extract standing water, place dehumidifiers and air movers, and monitor moisture daily until dry standard is reached. Antimicrobial treatment prevents mold colonization in wet cavities.

ALERT

Mold after fire and water damage

We follow ANSI/IICRC S520 for mold remediation, contain affected areas with negative air machines, and remove mold-damaged materials. Clearance testing confirms the area is clean before rebuild.

Pricing process

Fire and Flood Restoration Pricing

$8,000 - $45,000 depending on scope

Phase 01

Square footage affected

Larger areas require more extraction equipment, drying time, and materials. A 200-square-foot kitchen costs less to restore than a 1,500-square-foot floor.

Phase 02

Water volume and category

Clean water from firefighting is easier to dry than water that has picked up soot and debris. Category 2 or 3 water requires additional containment and disposal.

Phase 03

Rebuild scope

Cosmetic repairs like paint and trim cost less than structural work like framing, roofing, or electrical replacement. Permits add time and cost.

Questions before we arrive

Frequently Asked Questions

Fire and Flood Restoration
Call (833) 929-6186
How much does fire and flood restoration cost in PACIFIC PALISADES California?

Most dual-damage jobs in PACIFIC PALISADES run $8,000 to $45,000 depending on square footage, water volume, and rebuild scope. A small kitchen fire with limited water damage may fall near the low end; a structural fire with full-room rebuild lands higher. We provide a written scope and upfront pricing before work begins, and we bill insurance directly to reduce your out-of-pocket.

Can fire and water damage be restored at the same time in PACIFIC PALISADES?

Yes. Fire and water damage are restored in one sequence: water extraction and structural drying first, then soot and smoke removal, then rebuild. Doing both under one scope prevents mold from forming while smoke cleanup is underway. Our IICRC-certified technicians follow ANSI/IICRC S500 for the water side and S520 for mold prevention, so the two workstreams do not conflict.

How long does fire and flood restoration take in PACIFIC PALISADES California?

Most jobs take 2 to 6 weeks from emergency response to final walkthrough. Water extraction and drying take 3 to 5 days. Soot and smoke removal adds 2 to 4 days. Rebuild time depends on scope: a single room may take 1 to 2 weeks, while a whole-house rebuild can run 6 to 10 weeks. We give you a written timeline after the initial assessment.

Does insurance cover fire and flood restoration in PACIFIC PALISADES California?

Most homeowner policies cover fire damage and the water damage caused by firefighting, so both losses typically fall under one claim. We document every affected room with photos, moisture readings, and Xactimate line items to support your claim. We bill carriers directly and can speak with your adjuster on your behalf. Coverage limits and deductibles vary by policy, so review your declarations page.

Ready when you are

Get Fire and Flood Restoration in PACIFIC PALISADES, California

Water is still spreading and smoke odor is setting in. Every hour counts. Call our 24/7 line and a live technician will dispatch a crew to your PACIFIC PALISADES address, usually within 60 to 90 minutes. Written scope, upfront pricing, direct insurance billing.

Fire and Flood Restoration

Talk with the local team

Request Fire and Flood Restoration

Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.

960 Monument St, Pacific Palisades, CA 90272, USA, PACIFIC PALISADES, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now