Electrical Fire Cleanup

Soot, smoke and char removed before it spreads further

Electrical Fire Cleanup in PACIFIC PALISADES, California

Electrical Fire Cleanup in PACIFIC PALISADES, California starts with stopping the damage from spreading. When a panel, outlet or attic run fails, you get scorched framing, acrid smoke pushed through the HVAC, and soot settling on every surface. We handle electrical fire damage restoration PACIFIC PALISADES California homeowners call for at 2 a.m. - board-up, soot removal, odor control and a documented scope your insurer can use.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What's Included in Electrical Fire Cleanup

Every electrical fire cleanup in Pacific Palisades starts with the same core scope: make the structure safe, remove the soot and char, clear the air, and document the loss. Structural repair and rewiring are separate phases, but we coordinate them so you're not left holding the pieces.

01

Emergency Board-Up and Tarping

If the fire opened a wall, broke a window or damaged the roof, we secure it before we leave the first night. Plywood, tarps and temporary fencing keep weather, pests and curious neighbors out, and we photograph the openings for your insurance file.

02

Soot and Char Removal

Dry soot comes off with HEPA vacuums and soot sponges. Stubborn carbon on framing and masonry gets soda blasting or dry ice blasting, which strips the residue without gouging the wood. Contaminated drywall, insulation and lumber that can't be cleaned are cut out and hauled away.

03

Smoke Odor Elimination

Hydroxyl generators run 24 to 72 hours to break down odor molecules, and thermal fogging reaches into wall cavities and ductwork. We finish with charcoal odor absorbers in closets and cabinets, so the smell doesn't come back when the weather warms up.

04

HVAC and Duct Cleaning

Smoke from an electrical fire gets pulled into the return air and coats the inside of the ducts and the blower. We clean the HVAC components and replace the filters before the system runs again, so you're not redistributing soot every time the heat kicks on.

05

Moisture Mapping and Drying

Firefighting water soaks into framing, subfloor and insulation and can turn into mold within 48 to 72 hours. We map moisture with meters and thermal imaging, then run dehumidifiers and air movers to dry the structure to IICRC S500 standards before the rebuild starts.

06

Insurance Documentation Package

Photos, moisture readings, material quantities and a line-item Xactimate estimate go into a package you and your adjuster both receive. It's the difference between a claim that moves and one that stalls on a hand-written invoice.

Service overview

What Electrical Fire Cleanup in PACIFIC PALISADES, California Covers

Electrical Fire Cleanup in PACIFIC PALISADES, California is the specialized removal of soot, char, smoke residue and contaminated materials after a wiring, panel or appliance fire - plus the drying and deodorization that follows. It is not the same as a general house cleaning. Electrical fires leave a fine, oily carbon film that bonds to drywall, insulation and framing, and it carries a sharp acidic smell that soaks into lumber and fabric. We test surfaces, contain the affected rooms with negative air machines, and remove only what is actually contaminated.

Most Pacific Palisades electrical fires we see start behind a wall or in the attic, so the damage is hidden until smoke shows at a switch plate or the smell won't leave a bedroom. Older homes in the Alphabet Streets and Huntington Palisades often still have aluminum branch wiring or cloth-insulated knob-and-tube runs that overheated decades ago. If you're searching for electrical fire cleanup near me PACIFIC PALISADES California at 1 a.m., we answer, dispatch, and start containment the same night.

Stop Soot CorrosionSoot residue is acidic and starts pitting chrome, brass fixtures and appliance finishes within 24 to 72 hours. We neutralize and remove it with soot sponges and a degreaser matched to the surface, so your kitchen hardware and bathroom fixtures don't need replacing on top of the fire repair.
Clear the Air You BreatheSmoke from burning insulation and wire jackets carries fine particulates that lodge in lungs and HVAC filters. We run HEPA vacuums and air scrubbers with negative air machines to pull those particles out of the air, then replace the HVAC filters before the system runs again.
Protect the Insurance ClaimInsurers want photos, moisture readings, material quantities and a line-item scope. We document the electrical fire damage with thermal imaging and Xactimate-formatted estimates, which is why our electrical fire cleanup and repair PACIFIC PALISADES files move through adjusters faster than a hand-written invoice.
Fire Damage Restoration Pacific Palisades — your local Fire Damage Restoration team
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

How Our Electrical Fire Cleanup Process Works

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Emergency Response

We answer 24/7 and roll a truck to your address, usually within 60 to 90 minutes in the Palisades. First priority is safety: we confirm the power is off at the panel, check for hot spots with a thermal imaging camera, and board up or tarp any opening so weather and pests stay out.

Stage 1
02

Containment and Testing

We set negative air machines and plastic containment around the affected rooms so soot doesn't migrate into clean areas while we work. A moisture meter and thermal camera map where the fire heat and firefighting water went - charred framing often hides behind drywall that looks fine from the hallway.

Stage 2
03

Soot and Char Removal

Dry soot comes off first with HEPA vacuums and soot sponges. Stubborn residue on framing and masonry gets soda blasting or dry ice blasting, which strips carbon without gouging the wood. Contaminated drywall, insulation and lumber that can't be cleaned are cut out and bagged for disposal.

Stage 3
04

Deodorization and Drying

Hydroxyl generators run for 24 to 72 hours to break down smoke odor at the molecular level, and thermal fogging reaches into wall cavities and ductwork. If firefighting water soaked into framing or subfloor, dehumidifiers and air movers dry it to IICRC S500 standards before mold has a chance to start.

Stage 4
05

Clearance and Rebuild Handoff

We do a final walkthrough with you, photograph every cleared surface, and hand over the documentation package for your insurer. If structural repair after fire is needed - new drywall, paint, trim, or a licensed electrician's re-wire - we coordinate that phase so you're not managing three different contractors.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Thermal Imaging Camera

Finds hot spots inside walls and attic cavities after the fire is out, and maps where heat traveled so we open the right areas instead of guessing.

02

HEPA Vacuum and Air Scrubber

Captures fine soot and smoke particles down to 0.3 microns. Run with negative air machines, they keep soot from migrating into clean rooms while we work.

03

Hydroxyl Generator

Breaks down smoke odor molecules at the molecular level without the occupancy restrictions of ozone. Safe to run for 24 to 72 hours while the house is being cleaned.

04

Soda Blaster and Dry Ice Blaster

Strips carbon and char from framing, masonry and roof sheathing without gouging the wood or leaving abrasive residue behind.

05

Dri-Eaz and Phoenix Dehumidifiers

Pull moisture out of framing, subfloor and insulation after firefighting water soaks in, drying the structure to IICRC S500 standards before mold can start.

06

Moisture Meter

Reads moisture content in drywall, lumber and subfloor so we know when the structure is actually dry, not just dry to the touch.

Use cases

When You Need Electrical Fire Cleanup

These examples show how the service framework adapts rather than forcing every call through one repair.

Electrical Fire Cleanup
Panel Fire in Palisades HighlandsA failed 1960s service panel scorched the wall behind it and pushed acrid smoke through the garage and laundry room. The drywall was charred in a two-foot radius, and the framing behind it was black with carbon. → We opened the wall, removed the charred drywall and insulation, and soda-blasted the framing back to clean wood. Hydroxyl generators ran 48 hours. The electrician replaced the panel and run, and the wall was closed and painted. Nine days from call to clearance.

Bedroom Outlet Fire in Alphabet Streets

An outlet fire behind a bedroom wall sent fine black soot through the HVAC and coated the curtains, bedding and closet contents. The smell of burning wire jacket was strong in the hallway and adjacent bathroom. → We contained the bedroom, HEPA-vacuumed walls and ceiling, cleaned the HVAC components and ducts, and sent soft goods out for deodorization. Thermal fogging reached the wall cavity. Air tested clean in five days, and the tenant moved back in the following week.

Attic Wiring Fire in Riviera

An attic wiring fire smoldered in the insulation for hours before smoke showed at the ceiling line. The roof sheathing was charred in a four-foot section, and firefighting water soaked the ceiling joists. → We removed the contaminated insulation, dry-ice-blasted the charred framing and sheathing, and dried the joists with dehumidifiers and air movers. Thermal imaging confirmed no hot spots. The attic was re-insulated and the sheathing repaired within 11 days.

Problems we solve

Electrical Fire Problems We Solve in Pacific Palisades

Electrical fires cause a specific kind of damage that general cleaners aren't equipped to handle. Here are the problems we see most often when homeowners call us for electrical fire cleanup near me PACIFIC PALISADES California.

ISSUE

Hidden soot behind walls and in the attic

We use thermal imaging and moisture meters to map where heat and smoke traveled, then open the wall or attic where needed. Soot is removed at the source, contaminated insulation is replaced, and the cavity is cleaned before it's closed back up.

SYMPTOM

Smoke odor that won't leave after cleaning

We run hydroxyl generators and thermal fogging to break down the odor at the molecular level, then place charcoal odor absorbers in enclosed spaces. The air is tested before we call the job clear, so you're not guessing whether it worked.

SIGN

Firefighting water soaking structural framing

We extract standing water, map moisture with meters, and run dehumidifiers and air movers until the framing reads dry to IICRC S500 standards. Drying is documented for your adjuster so the mold risk is on the record as handled.

ALERT

Insurance adjuster disputes over scope

We build the scope in Xactimate with photos, measurements and material quantities, which is the format most carriers expect. You get a copy of everything we send your adjuster, and we'll walk through the scope with you line by line.

Pricing process

What Electrical Fire Cleanup Costs

$3,500 - $18,000 depending on scope

Phase 01

Size of the affected area

A single room with light soot takes far less labor and material than a fire that pushed smoke through the whole house. Square footage of contaminated surface - walls, ceilings, floors, contents - drives the biggest share of the price.

Phase 02

Whether walls must be opened

Hidden soot behind drywall means cutting, removing contaminated insulation, cleaning the cavity and closing it back up. That adds drywall, insulation and finish work to the scope, and it's the single biggest jump in most estimates.

Phase 03

HVAC contamination

If smoke got into the return air, the ducts, blower and filters need cleaning before the system runs again. HVAC cleaning adds time and equipment, but skipping it means soot gets redistributed every time the heat comes on.

Questions before we arrive

Frequently Asked Questions About Electrical Fire Cleanup

Electrical Fire Cleanup
Call (833) 929-6186
How much does electrical fire cleanup cost in PACIFIC PALISADES California?

Most electrical fire cleanup jobs in Pacific Palisades run $3,500 to $18,000 in 2026, depending on how far soot and smoke traveled and whether walls have to be opened. A single-room outlet fire with light soot is often in the $3,500 to $6,500 range; a panel fire with attic contamination and HVAC cleaning pushes toward the top. We provide a written scope before work starts, and most of the cost is typically covered by your homeowner's policy.

Can I stay in my home after an electrical fire in PACIFIC PALISADES?

Sometimes, but not usually during the first 48 to 72 hours. If the fire was contained to one room and the power is safely restored, you may be able to stay in an unaffected part of the house while we work. If the panel is damaged, if there's significant smoke throughout the HVAC, or if firefighting water soaked structural framing, we recommend staying elsewhere until clearance. We'll tell you honestly which situation you're in on the first walkthrough.

How long does electrical fire cleanup take in PACIFIC PALISADES California?

Typical electrical fire cleanup takes 3 to 10 days for the mitigation phase - soot removal, deodorization and drying - with structural repair adding another 1 to 4 weeks if walls or framing need replacement. A small outlet fire with limited smoke might clear in 3 to 4 days. A panel fire that pushed smoke through the whole HVAC system usually runs 7 to 10 days before the air tests clean.

Does electrical fire cleanup include rewiring in PACIFIC PALISADES California?

Cleanup itself does not include rewiring - that's licensed electrical work, and it has to be done by a California-licensed electrician. What we do is remove the charred drywall and insulation so the electrician can access the damaged run, then close everything back up after the new wiring passes inspection. We coordinate the electrician, the inspection and the patch-and-paint so the sequence stays in the right order.

Ready when you are

Call for Electrical Fire Cleanup in PACIFIC PALISADES, California

Soot etches deeper every hour and smoke odor sets into framing the longer it sits. Call (833) 929-6186 now for a live dispatcher, a 60-to-90-minute response window, and a written scope before any work begins. We're licensed, insured and IICRC-certified.

Electrical Fire Cleanup

Talk with the local team

Request Electrical Fire Cleanup

Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.

960 Monument St, Pacific Palisades, CA 90272, USA, PACIFIC PALISADES, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now