Commercial Fire Restoration

Board-up, soot removal, and smoke remediation for local businesses

Commercial Fire Restoration in PACIFIC PALISADES, California

Commercial Fire Restoration in PACIFIC PALISADES, California is the work of getting a burned storefront, office, or restaurant back to operating condition. We handle board-up, soot removal, smoke odor control, and structural repair under one crew. When commercial fire damage repair in PACIFIC PALISADES can't wait until Monday, we roll trucks 24/7 and start documenting for your insurance carrier the same day.

Live phone supportUpfront optionsBacked workmanship
Call firstLive triage can help before arrival
Safety before speedRisks assessed before work begins
Diagnose the causeWe trace the source, not just the symptom
Approve the workScope and price explained upfront

What's included

What Commercial Fire Restoration Includes

Every commercial fire loss is different, but the core scope covers emergency response through final rebuild. Here is what is included on a standard Pacific Palisades job, and what gets priced separately if your building needs it.

01

Emergency Board-Up and Tarping

Windows, doors, and roof openings get secured with plywood and tarps the same day. This stops rain, looters, and further damage while the claim gets processed.

02

Soot and Residue Removal

HEPA vacuuming, soot sponges, degreaser on kitchen residue, and soda or dry ice blasting on charred framing. Every surface gets tested before cleaning starts.

03

Smoke Odor Neutralization

Hydroxyl generators, thermal fogging, and charcoal odor absorbers treat wall cavities, ducts, and upholstery. Odor is neutralized at the molecular level, not masked.

04

Water Extraction and Drying

Firefighting water gets extracted and the structure dried with dehumidifiers and air movers. Moisture readings are logged daily until the building hits a dry standard.

05

Structural Rebuild

Drywall, insulation, lumber and framing, roofing shingles, paint and primer, and sealant and caulk get replaced to match existing finishes and pass city inspection.

06

HVAC Cleaning and Filter Replacement

Ductwork gets cleaned and HVAC filters replaced before the system runs again. Skipping this step is the most common reason smoke smell returns weeks after a cleanup.

Service overview

What Commercial Fire Restoration in PACIFIC PALISADES, California Involves

Commercial Fire Restoration in PACIFIC PALISADES, California is a licensed trade that removes soot, neutralizes smoke residue, dries water left by firefighting, and rebuilds charred framing so a business can reopen. It is not a cleaning job. Soot is acidic and etches metal fixtures, glass, and finished surfaces within 72 hours. Smoke pushes into HVAC ducts and attic cavities where it keeps off-gassing for months. We test surfaces with a moisture meter and thermal imaging camera before we touch anything, then write a scope your adjuster can price in Xactimate.

Most Pacific Palisades commercial losses we see start in a kitchen hood, an electrical panel, or a tenant space above a retail bay. The Village along Sunset Boulevard has older wood-frame buildings where fire travels through shared attic space fast. Coastal humidity here also slows drying and can push a smoke-damaged wall into mold growth inside two weeks. If you are searching for commercial fire restoration near me in PACIFIC PALISADES California at 2 a.m., that is exactly the call we staff for.

Board-Up Within HoursWe secure broken glass, burned doors, and roof openings with plywood and tarps the same day we arrive. That stops looters, rain intrusion, and the second wave of damage that turns a fire claim into a fire-and-flood claim. Most Pacific Palisades board-ups are finished within 4 hours of the call.
Insurance Documentation Done RightWe photograph every affected surface, log moisture readings, and build a line-item scope in Xactimate that carriers recognize. Adjusters approve clean, itemized scopes faster. We have walked hundreds of commercial claims through the process and we know what documentation gets questioned and what does not.
Smoke Odor Killed at the SourceWiping walls does not remove smoke smell. We use hydroxyl generators and thermal fogging to neutralize odor molecules inside wall cavities, ductwork, and upholstery. Charcoal odor absorbers stay in place after we leave. Most commercial spaces pass a smell test within 3 to 5 days instead of the 3 to 5 weeks a surface-only cleanup takes.
Fire Damage Restoration Pacific Palisades serving PACIFIC PALISADES, California
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.

The service timeline

What to Expect From Start to Reopening

The process flexes to the condition, but these checkpoints keep decisions clear.

01

Emergency Call and Board-Up

You call (833) 929-6186 and we dispatch a crew, day or night. First job is safety: we shut off utilities if the fire department has not, then board windows, brace doors, and tarp roof damage. Most board-ups finish in 2 to 4 hours. We take photos before anything moves so your claim starts with a clean record.

Stage 1
02

Inspection and Scope

A project manager walks the building with a thermal imaging camera and moisture meter, mapping where smoke and water traveled. We check HVAC ducts, attic cavities, and wall voids because soot hides there. You get a written scope within 24 to 48 hours, priced in Xactimate so your adjuster can review it line by line.

Stage 2
03

Soot and Smoke Removal

Technicians HEPA-vacuum loose soot first, then sponge walls with soot sponges and a degreaser on kitchen residue. We use soda blasting or dry ice blasting on charred framing where abrasive cleaning would damage the wood. Air scrubbers and negative air machines run the whole time to keep particles out of the rest of the building.

Stage 3
04

Drying and Deodorizing

Firefighting water soaks into drywall, insulation, and subfloor. We set dehumidifiers and air movers, then monitor with moisture meters until readings match a dry standard. Hydroxyl generators run 24 to 72 hours to break down smoke odor at the molecular level. Ductwork gets cleaned and HVAC filters get replaced before the system runs again.

Stage 4
05

Rebuild and Final Walk

We replace drywall, insulation, lumber and framing, roofing shingles, paint and primer, and sealant and caulk to match existing finishes. A final walk with you confirms the space is clean, dry, and odor-free. Most commercial rebuilds take 2 to 6 weeks depending on permit timelines with the city.

Stage 5

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.

01

Thermal imaging camera

Finds hidden hot spots, smoke travel paths, and water behind walls before demolition starts.

02

HEPA vacuum

Captures fine soot particles without blowing them back into the air.

03

Air scrubber and negative air machine

Keeps soot and dust contained to the work zone so the rest of the building stays usable.

04

Hydroxyl generator

Neutralizes smoke odor molecules in wall cavities, ducts, and upholstery over 24 to 72 hours.

05

Soda blaster and dry ice blaster

Removes char from framing without gouging the wood the way sanding or grinding would.

06

Dehumidifier and moisture meter

Dries firefighting water and verifies the structure hits a dry standard before rebuild.

07

Dri-Eaz and Phoenix Restoration Equipment

Industry-standard drying and air movement equipment we run on every water side of a fire loss.

Use cases

When to Call for Commercial Fire Restoration

These examples show how the service framework adapts rather than forcing every call through one repair.

Commercial Fire Restoration
Restaurant Hood Fire, Pacific Palisades VillageA kitchen hood fire sent grease-laden smoke through the dining room and ductwork. Soot coated every surface, sprinklers left standing water on the floor, and the smell was strong enough to reach the sidewalk. → Ducts degreased, dining room HEPA-vacuumed and sponged, hydroxyl generators ran 48 hours, HVAC filters replaced, and the floor dried to a verified standard. The dining room reopened in 9 days.

Office Electrical Fire, Marquez Knolls

An electrical fire charred a panel room and pushed smoke through the ceiling plenum into four tenant spaces. Soot settled on desks, files, and carpet, and the building was unusable. → Panel room cleaned and rebuilt with the electrician, plenum and ducts cleaned, all four suites deodorized, and carpet replaced in two units. Tenants returned in 3 weeks.

Retail Soot Cleanup, Alphabet Streets

A fire in the neighboring unit left soot on every surface of a boutique. Inventory, fixtures, and walls were coated, and the owner expected to be closed for a month. → Surfaces tested, loose soot HEPA-vacuumed, walls and fixtures sponged, air scrubbers ran continuously, and inventory was documented for the claim. The store reopened in 9 days.

Problems we solve

Commercial Fire Damage Repair PACIFIC PALISADES Problems We Solve

Most fire losses come with a second problem hiding behind the first. Here are the ones we see most often in Pacific Palisades commercial buildings and how we handle them.

ISSUE

Smoke odor that comes back after cleaning

We treat the source, not the surface. Hydroxyl generators run inside wall cavities and ductwork, thermal fogging reaches upholstery and framing, and charcoal odor absorbers stay in place after we leave. Most spaces pass a smell test in 3 to 5 days.

SYMPTOM

Hidden soot behind walls and above ceilings

We open outlet covers, drop ceiling tiles, and inspect with a thermal imaging camera before rebuild. Cavities get HEPA-vacuumed, sponged, and sealed with an encapsulant so the residue cannot migrate back into the finished space.

SIGN

Water damage from firefighting turning into mold

We extract standing water, set dehumidifiers and air movers, and log moisture meter readings daily until the structure hits a dry standard. Drying starts the same day as board-up, not after the soot cleanup.

ALERT

Insurance claim disputes stalling the rebuild

We build the scope in Xactimate with photos, moisture logs, and line items carriers recognize. Water damage from firefighting is documented separately so it does not get folded into the fire line and missed.

Pricing process

What Commercial Fire Restoration Costs

$8,000 - $60,000 depending on scope; full rebuilds can exceed $100,000

Phase 01

Square footage affected

Smoke travels. A 1,200 sq ft retail bay with smoke in the plenum costs more to clean than a 400 sq ft office with a contained fire.

Phase 02

Whether framing or roof burned

Charred lumber and framing means structural repair, permits, and inspection. That is the biggest single driver of cost on a commercial job.

Phase 03

Water damage from firefighting

Sprinkler and hose water adds extraction, drying, and sometimes drywall replacement. It gets scoped separately so it is not missed.

Questions before we arrive

Frequently Asked Questions

Commercial Fire Restoration
Call (833) 929-6186
How much does commercial fire restoration cost in PACIFIC PALISADES California?

Most commercial fire restoration jobs in Pacific Palisades run $8,000 to $60,000 in 2026, with small soot-and-smoke cleanups near the low end and full rebuilds above $100,000. Square footage, how far smoke traveled, and whether the roof or framing burned drive the number. Insurance usually covers the covered portion, and we build the scope in Xactimate so your adjuster can price it directly.

How long does commercial fire restoration take in PACIFIC PALISADES?

A smoke-and-soot cleanup typically takes 3 to 7 days. A rebuild with drywall, framing, and paint runs 2 to 6 weeks, and permit review with the city can add another 1 to 3 weeks. We give you a written schedule after the inspection and update it weekly so you can plan staffing and reopening.

Can my business stay open during fire restoration in PACIFIC PALISADES California?

Often yes. We build containment barriers and run negative air machines to keep soot and dust out of the open area, then phase the work so your front counter or dining room stays usable. If the fire hit the kitchen, electrical panel, or roof, a partial or full closure is usually unavoidable, and we tell you that on day one.

Does commercial insurance cover fire restoration in PACIFIC PALISADES California?

Most commercial property policies cover fire restoration, including board-up, soot removal, smoke deodorization, and rebuild, up to your policy limits. Business interruption coverage can also replace lost revenue during the closure. We document everything with photos, moisture readings, and an itemized Xactimate scope so your carrier has what it needs to approve the claim.

Ready when you are

Get Commercial Fire Restoration in PACIFIC PALISADES, California

One call gets a project manager on site, a board-up crew moving, and your insurance documentation started. We answer 24/7 and we do not hand you off to an answering service. Call (833) 929-6186 now.

Commercial Fire Restoration

Talk with the local team

Request Commercial Fire Restoration

Call (833) 929-6186 any hour of the day and a live technician will take your address and details. We give you an arrival window in that first call and dispatch a crew with board-up and extraction gear. If you prefer email, send your address and a few photos to info@firedamagerestorationpacificpalisades.com and we will respond the same day.

960 Monument St, Pacific Palisades, CA 90272, USA, PACIFIC PALISADES, CaliforniaMain office · technicians serve the full area

Thanks — your request is in. We will contact you shortly.

Call now